Menu
Your Cart
Bellek ve eMMC fiyatlarındaki artış nedeniyle ürün fiyatlarında aşırı bir artış olmuştur. Türkiye son kullanıcı satış fiyatlarımız güncelliğini yitirmiş olabilir, projelerinizde referans olarak kabul etmeyiniz.Toplu siparişleriniz için yeni fiyat alınız.

Bellek ve eMMC fiyatlarındaki artış nedeniyle ürün fiyatlarında aşırı bir artış olmuştur. Türkiye son kullanıcı satış fiyatlarımız güncelliğini yitirmiş olabilir, projelerinizde referans olarak kabul etmeyiniz.Toplu siparişleriniz için yeni fiyat alınız.

Banana Pi BPI-M2+

Banana Pi BPI-M2+
New Hot
Banana Pi BPI-M2+
$74,40
Ex Tax: $62,00
  • Stock: In Stock
  • Model: BPI-M2+
Your orders before 16:00 will be shipped the same day!

Banana Pi BPI-M2+

Banana Pi BPI-M2+ is a powerful quad-core SBC featuring Allwinner H3 processor, 1GB RAM, 8GB onboard eMMC, WiFi, Bluetooth, and Gigabit Ethernet.

Key Features

  • Allwinner H3 Quad-core Cortex-A7 @ 1.2GHz
  • Mali-400 MP2 GPU (4K video decode)
  • 1GB DDR3
  • 8GB eMMC onboard storage
  • WiFi 802.11 b/g/n + Bluetooth 4.0
  • Gigabit Ethernet
  • HDMI 1.4 (4K@30fps)
  • CSI camera interface
  • 40-pin GPIO
  • IR receiver

Specs

CPUH3 Quad-Core 1.2GHz
RAM1GB DDR3
Storage8GB eMMC + MicroSD
WiFi/BT802.11 b/g/n + BT 4.0
NetworkGigabit Ethernet
VideoHDMI 1.4 (4K)
Size65x65mm

OS

Android, Ubuntu, Debian, Armbian, Raspbian

Hardware
CPU Allwinner H3 Quad-core 1.2GHz Cortex-A7
GPU Mali400MP2 GPU @600 MHz,Supports OpenGL ES 2.0
Memory 1GB DDR3 (shared with GPU)
Storage MicroSD (TF) card, 8GB eMMC onboard
Network 10/100/1000 Ethernet
Video Supports HDMI output with HDCP, Supports HDMI CEC, Supports HDMI 30 function, Integrated CVBS, Supports simultaneous output of HDMI and CVBS
WiFi SDIO AP6212
Bluetooth BT 4.0
Audio Output(s) HDMI
Camera A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL, 3 Supports SM pixel camera sensor, 4 Supports video capture solution up to 1080p@30fps
Display HDMI
USB ports 2x USB 2.0 HOST, 1x USB 2.0 OTG
GPIO 40 Pins Header,compatible with Raspberry Pi B+
Power Source 5V/2A DC input can supply power, but USB OTG input don’t supply power
Physical properties
Buttons uboot, reset
Leds Power led & Status led
IR IR Receiver (x1)

Write a review

Note: HTML is not translated!
Bad Good