Menu
Your Cart
Bellek ve eMMC fiyatlarındaki artış nedeniyle ürün fiyatlarında aşırı bir artış olmuştur. Türkiye son kullanıcı satış fiyatlarımız güncelliğini yitirmiş olabilir, projelerinizde referans olarak kabul etmeyiniz.Toplu siparişleriniz için yeni fiyat alınız.

Bellek ve eMMC fiyatlarındaki artış nedeniyle ürün fiyatlarında aşırı bir artış olmuştur. Türkiye son kullanıcı satış fiyatlarımız güncelliğini yitirmiş olabilir, projelerinizde referans olarak kabul etmeyiniz.Toplu siparişleriniz için yeni fiyat alınız.

Banana Pi BPI-M2 Berry

Banana Pi BPI-M2 Berry
New
Banana Pi BPI-M2 Berry
$64,62
Ex Tax: $53,85
  • Stock: In Stock
  • Model: BPI-M2 Berry
  • Weight: 40.00g
  • Dimensions: 85.00mm x 56.00mm x 0.00mm
Your orders before 16:00 will be shipped the same day!

Banana Pi BPI-M2 Berry

Introducing the Banana Pi BPI-M2 Berry - the perfect mini single board computer for all your projects! With its powerful quad-core Allwinner V40 SoC processor and 1GB of RAM, this little computer is packed with enough punch to handle all your computing needs.

The BPI-M2 Berry comes equipped with onboard WiFi and Bluetooth, making it easy to connect to the internet and other devices. It also features a range of ports, including 4 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, and a SATA port - perfect for media related projects such as storage servers.

As a member of the Banana Pi family, the M2 Berry is a direct upgrade from the Banana Pi M1/M1+ and supports SATA from the SoC. Its SATA performance is fitting for media related projects such as storage servers. Whether you're a company looking to build servers, a DIY enthusiast, or a tech-loving individual, our community welcomes you! Together, we can make a difference, discover our passions, inspire others, and build practical projects.

At the size of a Raspberry Pi 3, you can easily use a Raspberry Pi 3 case for the BPI-M2 Berry.

Other key features include an Allwinner A40i/R40/V40 Quad Core ARM Cortex A7 CPU, 1GB DDR3 SDRAM, MIPI DSI interface, and CSI camera interface.
Hardware
CPU ALLWINNER R40/V40/A40I QUAD CORE ARM CORTEX A7
GPU Dual-core MALI-400 MP2
Memory 1GB DDR3 733MHz (shared with GPU)
Storage MicroSD Card, SATA
Network 10/100/1000Mbps Ethernet (Realtek RTL8211E/D)
Video Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decode up to 1080P60,support video encodeing:High-deinition(HD)H.264 video encoder is up to 1080P@45fps
WiFi WiFi 802.11 b/g/n (AP6212 module on board)
Bluetooth BT4.0
Audio Output(s) HDMI, analog audio (via 3.5 mm TRRS jack), I2S audio (also potentially for audio input)
Camera A CSI input connector Camera:Supports 8-bit YUV422 CMOS sensor interface,Supports CCIR656 protocol for NTSC and PAL,Supports 5M pixel camera sensor ,Supports video capture solution up to 1080p@30fps
Audio Input(s) On board microphone
Display 4-lane MIPI DSI display,or RGB panel or LVDS panel,TV-out on HDMI V1.4
USB ports 4 USB 2.0 host, 1 USB 2.0 OTG
GPIO 40 Pin Header 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
Power Source 5V/2A with micro USB port
Physical properties
Buttons Reset button, Power button, U-boot button
Leds Power status Led and RJ45 Led

Write a review

Note: HTML is not translated!
Bad Good